Red granite Multicolor
Use of
Red granite is widely used in the production of various products:
– Flooring (tiles and slabs);
– Finishing panels (plinth, facade, fence);
– Steps (stairs, stairs);
– Granite pavement
– Granite window sills
– Roads and sidewalks curbs
– Bar and kitchen table top
– Bathroom surfaces
– Fireplace decoration
– Dune monument (tombstone);
– Improvement elements (fountains, sculptures, benches, garden paths, gazebos, urns, vases);
Type of processing
Red granite treatments:
– Polished . Used for floor coverings (tiles, slabs), finishing slabs (plinths, facades), steps (stairs, stairs), window sills, bar and table surface, bathroom surface, fireplace decoration, dune monuments (tombstones), as well as in most landscaping elements.
– Polished . Used for floor coverings (tiles, slabs), finishing slabs (plinths, facades), steps (stairs, stairs), fireplace decoration, as well as improvement elements.
– Burned . Used for floor coverings (tiles, slabs), finishing slabs (plinths, facades), steps (stairs, stairs), granite pavement, road and sidewalk curbs, dune monuments (tombstones), as well as improvement elements.
– Broken . Finishing slabs (plinths, facades), steps (stairs, stairs), granite pavement, road and sidewalk curbs, dune monuments (tombstones), as well as improvement elements.
Declaration of conformity of granite
Red granite products have a declaration of conformity depending on the intended use:
– LVS EN 1341: 2013 – Natural stone slabs for external coverings. Requirements and test methods.
– LVS EN 1342: 2013 – Natural stone paving stones (forged stones) for external pavements. Requirements and test methods.
– LVS EN 1343: 2013 – Natural stone edging for external coverings. Requirements and test methods.
– LVS EN 12058: 2015 – Natural stone products. Floor and stair plates. Requirements.
– LVS EN 1469: 2015 – Natural stone products. Slabs for wall covering. Requirements.
– LVS EN 12057: 2015 – Natural stone products. Tiles. Requirements.
Products
Video
Physical and mechanical properties
Indicative laboratory test results:
Apparent density 2610 – 2690 kgr / m3 (EN 1936)
Open porosity 0.7 vol. (EN 1936)
Flexural strength 11 – 17 MPa (EN 12372)
Compressive strength 160 – 190 MPa (EN 1926)
Water absorption 0.25-0.30% by weight. (EN 13755)
This information is based on our current knowledge of laboratory tests and other sources of information. However, this
does not provide a guarantee for a particular batch of stone and does not establish legal force.