Road granite edging 100x22x15 cm Ceļu granīta apmale 100x22x15 cm pazemināta

Granite curb

Road granite edging 100x22x15 cm (lowered)

LVS EN 1343:2013 – Natural stone edging for exterior coverings. Requirements and test methods.

Lowered granite edging 1000x220x150 mm or 1000x150x220 mm is installed in driveways, before pedestrian crossings, driveways. A sloping edge 100×30 / 22×15 cm and 100×22 / 30×15 cm is installed from the side. One long edge sawn 2×2 cm (20×20 mm).

 

Images

Granīta apmale 22 cm
Granite edging height 22 cm (220 mm)
Granīta apmale 15 cm
Granite edging thickness 15 cm (150 mm)
granīta apmales 100 cm
Granite edging 100 cm (1000 mm)

Physical and mechanical properties

Indicative laboratory test results:

Parameters to be tested Testing methods Test results
Observed density EN 1936:2006 2640 kg/m3
Open porosity EN 1936:2006 0,88%
Water absorption EN 13755:2008 0,28%
Bending strength under natural conditions EN 12372:2006 15,0 MPa
Flexural strength after 56 freezing / thawing cycles EN 12371:2010 14,3 MPa
EN 12372:2006
Rubbing fastness (sawn) EN 14157:2004 A method 20,8 mm
Slip resistance (sawn) CEN/TS 16165:2012 SRV „dry”: 75
Annex C SRV „wet”: 66
EN 14231:2003
Compressive strength under natural conditions EN 1926:2006 184 MPa
Compressive strength after 56 freeze / thaw cycles EN 12371:2010 182 MPa
EN 1926:2006
Destructive load EN 13364:2001 1745N
Petrographic description EN 12407:2007 Blasto monconite granite

A stone declaration of conformity (Declaration of Performance) (DoP) is available.

This information is based on our current knowledge of laboratory tests and other sources of information. However, it does not guarantee a specific batch of stone and does not create legal force.